UGIMA® 4028/UGI® 4028
UGIMA® 4028/UGI® 4028 introduction
In the treated state, a martensitic grade combining excellent mechanical properties with good corrosion resistance on suitably polished surfaces in moderately aggressive non-chlorinated environments. UGIMA® grade produced according to an Ugitech process to significantly improve its machinability (15% to 25% increase in productivity), up to diameter 115 mm.
Equivalent material: EN 1.4028, EN X30Cr13, DIN 1.4028, DIN X30Cr13, AISI 420
- EN 10088-1 Grade X30Cr13 quenched and tempered (+QT850)
- DIN 17440 Grade X30Cr13 soft annealed (+A)
- DIN 17440 Grade X30Cr13 quenched and tempered (+QT)
- EN 10250-4 Grade X30Cr13 quenched and tempered (+QT)
- EN 10250-4 Grade X20Cr13 soft annealed (+A)
- EN 10250-4 Grade X30Cr13 soft annealed (+A)
- JIS G4304 Grade SUS420J1 annealed
- JIS G4304 Grade SUS420J2 annealed
- JIS G4305 Grade SUS420J1 annealed
- JIS G4305 Grade SUS420J2 annealed
UGIMA® 4028/UGI® 4028 general
| Property | Value |
|---|---|
| Carbon | Carbon of 0.30000000000000004 % |
| Chromium | Chromium of 13.0 % |
UGIMA® 4028/UGI® 4028 mechanical
| Property | - | - | |||
|---|---|---|---|---|---|
| Application areas | |||||
| Corrosion properties | |||||
| Heat Treatment | |||||
| Other | Product | Shape | Finish | Tolerance | Dimensions |
| Bar | Round | Rolled and descaled bars | 12 to 13 | 22 to 15 mm | |
| - | Round | Turned and polished | 9 to 11 | 22 to 115 mm | |
| - | Round | Drawn bar | 8 to 9 | 3 to 55 mm | |
| - | Round | Ground bar | 6 to 9 | 3 to 80 mm | |
| - | Hexagonal | Drawn bar | 11 | 3 to 55 mm | |
| Wire rod | Round | Pickled | - | 5.0 to 32 mm | |
| Drawn wire | Round | - | - | 16.0 to 1.0 mm |