S235J2G3 is a fine grained steel for welding constructions of high load. The steel is applicated up to temperatures of -20°C subject to the load. For this steel are available (mat. No 1.0118 acc. to DIN EN 10025) grades for: - folding (KQ)-S235J2G3C - cold forming of sections (KP)-S235J2G3C - cold ...
Equivalent material: GOST S235, ISO Fe360D1, JIS SS330, ÖNORM St360CE, ASTM A109TemperNo.3, ASTM D, DIN St37-3N, DIN 1.0116, DIN St 37-3, DIN S235J2S355K2G3 is a high-tensile fine grained steel for welding constructions of dynamic load. The steel is applicated up to temperatures of -20°C. Mechanical properties in thickness direction have to comply with EURONORM 164. Compared to S235J2G3 is achievable a considerable saving of material due to th ...
Equivalent material: AFNOR E36-4, ASTM B, DIN 1.0595, DIN S355K2G3, DIN S355K2, DIN Fe 510 DD1, AFNOR 9160C051, AFNOR 9160/C27, EN E600, EN 1.0595S355J2G3 is a high-tensile fine grained steel for welding constructions of dynamic load. The steel is applicated up to temperatures of -20°C. Compared to S235J2G3 is achievable a considerable saving of material due to the by 120 MPa higher yield point. The steel shows a by 15% higher resistance to ...
Equivalent material: AFNOR E36-4, BS 50D, GOST S345, ISO Fe510D1, JIS SM53C, CSA 60T, NS NS12153, ÖNORM St510D, ASTM A105, ASTM 50S275J2G3 is a fine grained steel for welding constructions of dynamic load. The steel is applicated up to temperatures of -20°C. Compared to S235J2G3 is achievable a saving of material due to the by 40 MPa higher yield point. For this steel are available (mat. No 1.0141 acc. to DIN EN 10025) grade ...
Equivalent material: ISO Fe430D1, JIS SS400, CSA 260WT, ÖNORM St430CE, SS 1414-00, ASTM D, ASTM 42, ASTM 58, ASTM 70, DIN St44-3NS235JRG2C is used for folding, section cold forming and cold drawing grade. The steel is applicable for welding constructions up to -20 °C subject to the load. Max. product thickness amounts 20 mm for folding and 8 mm for cold roll forming grades. ...
Equivalent material: JIS SS330, DIN 1.0115, DIN St 37-3 U, DIN S235J0C, EN 1.0115S235JRG2C is used for folding, section cold forming and cold drawing grades. The steel is applicable for welding constructions up to -20 °C subject to the load. Max. product thickness amounts 20 mm for folding and 8 mm for cold roll forming grades. As a bright-steel product it is used in the form o ...
Equivalent material: JIS SS330, DIN RQSt37-2, DIN 1.0122, DIN RQSt 37-2, DIN S235JRC, DIN S235JRG2C, AFNOR S235JRG2, BS S235JRG2, JIS E235B, EN S235JRCThe hot rolled, unalloyed quality steel S185 is applicated for not strength loaded parts that are not liable to inspection. The chemical composition is not specified. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot ...
Equivalent material: GB Q195, GB U11952, GB U11950, GB U11951, IS Fe290, IS Fe310, IS E165, IS SS330, GOST St0, GOST СT0S960Q is a tempered and weldable fine grained steel. yield point: >960 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -20°C is warranted a notch ...
Equivalent material: DIN S960Q, IS S960QD, DIN StE960V, DIN 1.8941, EN 1.8941S690QL is a tempered and weldable fine grained steel. yield point: >690 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -40°C is warranted a notc ...
Equivalent material: ASTM Grade 100, DIN S690QL, GB Q690E, GB L06915, IS S690QE, IS E690-E, ASTM A514 Grade A, ASTM A514 Grade B, ASTM A514 Grade E, ASTM A514 Grade FS690Q is a tempered and weldable fine grained steel. yield point: >690 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -20°C is warranted a notch ...
Equivalent material: ASTM Grade 100, DIN S690Q, IS S690QD, ASTM A514 Grade F, DIN StE690V, DIN 1.8931, EN 1.8931S620QL is a fluid tempered high-strength fine grain weldable steel and a min. yield point of 620 N/mm². It is applicated for steel structures, e.g. bridge and load-carrying constructions, lifting and earthmoving machines. The normal thickness span is 3 to 100 mm. Lowest application temperature -40 ...
Equivalent material: ASTM Grade 100, GB Q620E, GB L06215, IS S620QE, ASTM A514 Grade Q, DIN TStE620V, DIN 1.8927, DIN TStE 620 V, DIN S620QL, DIN Aldur 58/72The tempered and fine grain weldable steel S620Q is used for constructions, such as transport vehicles, lifting and earthmoving machines, load-carrying constructions etc. Lowest application temperature -20 °C. ...
Equivalent material: ASTM Grade 100, IS S620QD, DIN StE620V, DIN 1.8914, EN 1.8914S550QL is a tempered and weldable fine grained steel. yield point: >550 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -40°C is warranted a notc ...
Equivalent material: ASTM Grade 100, GB Q550E, GB L05515, IS E550-E, DIN TStE550V, DIN 1.8926, DIN TStE 550 V, DIN S550QL, DIN Aldur 55/68, EN 1.8926S550Q is a tempered and weldable fine grained steel. yield point: >550 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -20°C is warranted a notch ...
Equivalent material: IS S550Q, DIN StE550V, DIN 1.8904, EN 1.8904S500QL1 is a tempered and weldable fine grained steel. yield point: >500 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -60°C is warranted a not ...
Equivalent material: ASTM Grade D, IS S500QF, DIN EStE500V, DIN 1.8984, DIN S500QL1, EN 1.8984S500QL is a tempered and weldable fine grained steel. yield point: >500 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -40°C is warranted a notc ...
Equivalent material: ASTM Grade D, GB Q500E, GB L05015, IS S500QE, IS E550-E, DIN TStE500V, DIN 1.8909, DIN TStE 500 V, DIN S500QL, DIN Aldur 50/65