The weather resistant steel S235J2W with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 235 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, exh ...
Equivalent material: GB Q235NH, GB L52350, IS S235WD, IS HSA235WD, IS SMA400, KS SMA400, DIN WTSt37-3, DIN PATINAX37-3, DIN 1.8961, EN 1.8961The hot rolled, unalloyed quality steel S450J0 will only be used for long products. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery. The delivery condition is up to the produ ...
Equivalent material: GB Q295B, GB L02952, IS Fe540, IS FeE400, IS E450, IS Fe570, DIN 1.0590, DIN S450J0, AFNOR S450J0, BS 55 CThe weather resistant steel S355J2WP with improved atmospheric corrosion resistance (by generation of an conversion coating) has a minimum yield strength of 355 N/mm². It is applicated for welded, screwed and riveted constructions, e.g. structural engineering, bridge building, tank construction, ex ...
Equivalent material: GB Q355GNH, GB L53551, IS S355WPD, ASTM A242Type1, UNS K11510, DIN 1.4946, EN 1.4946, ASTM Grade 1A, DIN 1.8946, EN 1.8946KSt 44-2 is used as grade for roll forming to shape. Its used for welded constructions up to - 25 °C. ...
Equivalent material: DIN 1.0148, EN 1.0148S235JRG2C is used for folding, section cold forming and cold drawing grade. The steel is applicable for welding constructions of dynamic strain up to -20 °C subject to the load. Mechanical properties in thickness direction have to comply with EURONORM 164 by arrangement. Max. product thickness amou ...
Equivalent material: JIS SS330, DIN 1.0119, DIN S235J2G4C, DIN S235J2C, EN S235J2C, EN 1.0119RoSt 44-3 is used for the manufacturing of welded tubes. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 20°C. ...
Equivalent material: EN S275J2H, DIN 1.0138, DIN S275J2H, AFNOR S275J2H, BS S275J2H, AISI 290A, SAE 290A, EN 1.0138, ISO S275J2HRSt 37-2 Cu 3 is used for welded constructions stress dependent up to - 25 °C. It shows a better corrosion behaviour because of the Cu content. ...
Equivalent material: DIN 1.0167, DIN S235JRG2Cu, EN S235JRG2Cu, EN 1.0167RPSt 37-2 is used for forgings for welded constructions stress dependent up to - 20 °C. ...
Equivalent material: DIN 1.0172, EN 1.0172PSt 44-3 is used for forgings. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 20°C. ...
Equivalent material: DIN 1.0135, EN 1.0135PSt 44-2 is used for forgings. Its applicated for welded constructions up to -25 °C. ...
Equivalent material: DIN 1.0146, EN 1.0146S235JRC is applicated for moderately loaded construction parts that are not liable to inspection as folding, section cold forming and cold drawing grades. Max. product thickness amounts 20 mm for folding and 8 mm for cold roll forming grades. ...
Equivalent material: JIS SS330, DIN 1.0122, DIN RQSt 37-2, DIN S235JRC, DIN S235JRG2C, AFNOR S235JRG2, BS S235JRG2, JIS E235B, EN S235JRG2C, EN Fe 360 BQSt 44-3 is used as folding grade. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 20°C. ...
Equivalent material: DIN 1.0133, EN 1.0133KSt 44-3 is used as grade for roll forming to shape. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 20°C. ...
Equivalent material: DIN 1.0137, EN 1.0137RSt 37-2 is used for for welded constructions stress dependent up to - 25 °C. ...
Equivalent material: GB Q235A, AFNOR E24-2NE, BS 40C, GOST S245, ISO Fe360-B, UNI Fe360BFN, ÖNORM RSt360B, SS 1312-00, UNE A360BNE, ASTM CS275J2C is the cold forming grade of the S275J2. The steel is suited for bending and folding up to thicknesses of 30 mm and suited for roll forming up to 8 mm thickness (minimum values for the radius see Formability - Bending - Folding). Application: structural steel work ...
Equivalent material: IS E275, EN S275J2G4C, DIN 1.0142, DIN S275J2G4C, DIN S275J2C, EN 1.0142S235J2C is the cold forming grade of the S235J2. The steel is suited for bending and folding up to thicknesses of 30 mm and suited for roll forming up to 8 mm thickness (minimum values for the radius see Formability - Bending - Folding). Application: structural steel work ...
Equivalent material: IS E250, EN S235J2G4C, DIN 1.0119, DIN S235J2G4C, DIN S235J2C, EN 1.0119S235JRG1 is applicable for welding constructions at temperatures of -20°C subject to the load. Max product thickness accounts for 25 mm. The steel shows for higher sections a cleavage fracture sensitivity. For this steel are available (mat. No 1.0121 acc. to DIN EN 10025) grades for: - folding (KQ) ...
Equivalent material: GOST S245, ISO Fe360B, JIS SS330, CSA 230G, NS NS12122, ÖNORM USt360B, UNE AE235B-FU, ASTM C, DIN USt37-2, DIN 1.0036RoSt 44-2 is used for the manufacturing of welded tubes. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 25 °C. ...
Equivalent material: EN S275J0H, DIN 1.0149, DIN ST 44-3 U, DIN S275J0H, AFNOR TS E 275 3, AFNOR S275J0H, BS 43 C, BS S275J0H, EN 1.0149, ISO S275J0HRQSt 37-2 is used as folding grade for welded constructions stress dependent up to - 20 °C. ...
Equivalent material: EN S235JRG2C, DIN 1.0122, DIN S235JRC, DIN S235JRG2C, AFNOR S235JRG2, BS S235JRG2, JIS E235B, EN S235JRC, EN Fe 360 B, EN 1.0122S275JRC is used for folding, section cold forming and cold drawing grade. The steel is applicable for temperatures up to -20 °C. Compared to S235JRC is achievable a saving of material due to the by 40 MPa higher yield point. Max. product thickness amounts 20 mm for folding and 8 mm for cold roll fo ...
Equivalent material: JIS SS400, DIN QSt44-2, DIN 1.0128, DIN St 44-2, DIN QSt 44-2, DIN S275JRC, AFNOR S275JRC, BS S275JRC, JIS E275A, EN 1.0128S275J0C is used for folding, section cold forming and cold drawing grade. The steel is applicable for temperatures up to -20 °C subject to the load. Compared to S235J0C is achievable a saving of material due to the by 40 MPa higher yield point. Max. product thickness amounts 20 mm for folding and 8 ...
Equivalent material: JIS SS400, DIN 1.0140, DIN QSt 44-3 U, DIN S275J0C, EN 1.0140S355K2G4C is used for folding, section cold forming and cold drawing grade. The high-tensile fine grained steel is applicable for welding constructions of dynamic load up to -20 °C. Compared to S235J2G3C is achievable a considerable saving of material due to the by 120 MPa higher yield point. The s ...
Equivalent material: DIN 1.0594, DIN S355K2G4C, DIN S355K2C, EN S355K2C, EN 1.0594S355J2G4C is used for folding, section cold forming and cold drawing grade. The high-tensile fine grained steel is applicable for welding constructions of dynamic load up to -20 °C. Compared to S235J2G4C is achievable a considerable saving of material due to the by 120 MPa higher yield point. The s ...
Equivalent material: DIN 1.0579, DIN S355J2G4C, DIN S355J2C, AFNOR S355J2C, BS S355J2C, EN S355J2C, EN 1.0579, ASTM Grade C, UNS K12000S275J2G4C is used for folding, section cold forming and cold drawing grade. The steel is applicable for welding constructions of dynamic load up to -20 °C. Mechanical properties in thickness direction have to comply with EURONORM 164 by arrangement. Max. product thickness amounts 20 mm for folding ...
Equivalent material: JIS SS400, DIN 1.0142, DIN S275J2G4C, DIN S275J2C, EN S275J2C, EN 1.0142